Cannot Locate the Pilot? Protocol Parsing Outputs Remote-Controller Coordinates Directly

When security teams need to know whether a drone is spying nearby, they no longer have to rush back to a control room full of monitors. A 658g handheld terminal — the CH09PRO — powers on in 3 seconds and reveals the drone model, coordinates, altitude and even the pilot's remote-controller location, compressing capability that once needed fixed base stations into a phone-sized unit.Traditional handheld detectors only scan spectrum and cannot identify the aircraft; others recognize just one brand protocol and go blind against FPV racing drones. The CH09PRO fuses DroneID parsing, RemoteID recognition and spectrum detection to cover both mainstream drones and FPV — solving the "can see but cannot identify" problem.

Triple Detection Technology, 950 Drone Models Covered

DroneID + RemoteID: Direct Pilot Coordinate Output

The device supports DroneID message parsing for OcuSync 2.0, 3.0 and 4.0 protocols, directly extracting drone brand, model, longitude, latitude, serial number and remote-controller location (Evidence: Product Technical Specification). It also supports RemoteID broadcast recognition across Chinese, EU and US standards, with a RemoteID detection range of 1–2 km. For drones that do not broadcast identity information, spectrum detection mode covers the full 100–6000 MHz band at a range of 1–3 km (Evidence: Product Technical Specification).

A built-in library of 950 drone models covers mainstream brands including DJI and Autel, as well as custom-built racing drones and analog-video FPV systems. The device simultaneously tracks ≥10 drones with a response time of just 3 seconds. The 300–1500 MHz band — commonly used by FPV racing drones — receives dedicated enhancement, addressing the low FPV recognition rate that plagues conventional detectors.

6-Inch Touchscreen + Android 12: Ready Out of the Box

A 6-inch touchscreen with 1080×2160 resolution runs Android 12 (Evidence: Product Technical Specification), delivering an intuitive interface that enters detection mode immediately on power-up — no complex configuration required. The map view displays real-time drone positions, flight trajectories and remote-controller locations; tapping a target reveals model, serial number, frequency and signal strength. With 8GB RAM and 256GB storage, it retains extensive historical detection records and trajectory data. Both online and standalone offline modes are supported, ensuring operation even without network access.

658g Ultra-Light, IP54 Rainproof for Field Use

Weighing only 658g with antennas and measuring 185×80×33mm (excluding antennas), the unit is barely larger than a standard walkie-talkie — it fits in a pocket or clips onto a tactical vest. An 8000mAh battery delivers 3–4 hours of runtime for extended patrols. IP54 rainproof protection, an operating temperature range of -35°C to 50°C and a rugged ABS body make it suitable for harsh outdoor environments. The complete kit, including accessories, weighs just 2.6 kg in a protective carrying case for easy transport and rapid deployment.

Handheld Detection Is Shifting from "Backup Tool" to "Frontline Standard"

As drone management evolves from "presence detection" to "precision positioning," demand for portable detection terminals among frontline personnel is growing rapidly. What once required fixed base stations and vehicle systems can now be accomplished on a single handheld device. When selecting equipment, three dimensions warrant priority attention: first, whether detection technology is diverse enough to cover protocol parsing, RID recognition and spectrum scanning simultaneously; second, whether the model library is large enough to identify FPV and other non-mainstream aircraft; and third, whether portability and battery life support long-duration single-operator patrols. The CH09PRO is purpose-built across all three dimensions, making it a practical choice for temporary security checkpoints, VIP escort, patrol enforcement and other mobile scenarios.